一、強弱電系統工程
A, strong or weak electricity systems engineering
強弱電工程是實驗室裝修裝飾工程中最主要的一點，因為它關系著整個公司的正常工作，所以也不能忽視。首先還是要找專業有資質的綜合布線公司，由專業技術人員到現場進行實際測量，把強弱電的預留開關，插座以及各種線路走向全部體現規劃到圖紙上，然后交與物業公司，裝飾公司的審核是要求達到他們寫字樓規定標準，如：電線必須穿管、穿什么樣的管、電氣系統布置是復合他們所預留的輸出系統等，至于客戶所要求的用電需求和他們要求的不一樣，所以在上報物業審核前，客戶自己要先審核，主要是看看能否滿足自己的使用需要。
Strong and weak electricity engineering is one of the main laboratory in decoration engineering,because it's relationship with the normal work of the whole company, so also cannot ignore. First or to find a qualified professional integrated wiring, conducted by professional and technical personnel to the site actual measurements, the strong and weak electricity reserve switches, sockets and a variety of lines on the drawings to reflect all planning, property company, and then to the audit is required to achieve their office building decoration company regulation standard, such as: wire must wear tube, pipe, electrical system arrangement of what is compound the output system and so on, they set aside as required by the customer demand and their requirements, so before the audit report to property, customer need to review, main is to see whether the use of to satisfy his needs.
二、消防工程很關鍵
Second, the fire engineering is the key
大多數實驗室裝修裝飾時都要做隔斷，如果隔斷要到頂部的時候，就要進行煙感和噴淋的改動，而很多物業公司通常都把這個燙手的山芋交給業主或者裝飾公司自行去解決，這樣一來就要找有那些有資質的消防公司，消防公司按照規定還要報批當地消防局進行審批，這個時間通常要10~15天。
Most of the decoration in lab to do partition, if the partition to the top, do smoke and spray changes, and many property company usually put the hot potato to owner or decoration company to solve on their own, so will be looking for those who have the qualification of the fire, the fire company and approval in accordance with the relevant provisions for approval by the local fire department this time is usually 10 ~ 15 days.
三、中央空調
Third, the central air conditioning
同樣還是在實驗室裝修裝飾中需要隔斷來劃分空間，那么就要考慮到每個空間都要保留一定數量的中央空調出風口與回風口，這樣一來同樣還需要找有正規資質的中央空調安裝公司。在實驗室裝修裝飾改造前一定要先把中央空調改造平面布置圖交與物業公司審核。工程完工后物業公司還要求出示一份中央空調工程竣工圖。
In the lab is also need to divide the space partition in the decoration, it will have to consider every space to keep a certain number of central air-conditioning outlet and inlet, so also need to find a formal qualifications of central air-conditioning installation company. Decoration in the laboratory to transform the central air conditioning must be before layout to property company audit. After the completion of the engineering property company also asked to show a central air conditioning project completion.
四，辦公家具
Four, office furniture
辦公家具在實驗室裝修 裝飾設計前要先找好裝修公司或者家具公司，因為大多數辦公室都需要辦公高隔斷，很多線路，插座都要與隔斷相連接的，所以家具公司一定要與電器工程師有個緊密的銜接，圖紙最好要先由這兩方共同確定完后，拿到物業公司審核，他們的審核通過后就可以放心的開工了。
Office furniture decoration design in the laboratory before you find a good decorate a company or a furniture company, because most of the office needs to be high office partition, a lot of lines, the socket is connected to partition, so furniture company must with electrical engineers have a strong cohesion, drawing the best first after the determined jointly by the two parties, to get the property company audit, they can rest assured starts after approval.